COFEM CLVR
- Код:
- 002755
- Цена:
- 218,80 Eur180,83 Eur
Аналоговая панель, 2 зон, не расширяемая
Еще в силе акционная скидка 15% от стандартной цены на все варианты панели CLVR:
CLVR 4 (4 зоны) - 245,11 EUR (с НДС)
CLVR 8 (8 зон) - 264,50 EUR (с НДС)
CLVR 12 (12 зон) - 282,50 EUR (с НДС)
Features
• Control panels up to 12 zones for conventional detectors and call points use.
• 2 supervised sounder outputs, delayed from 0 to 10 minutes, and protected by a fuse.
• 1 alarm output through a dry contact NO/NC (normally open / normally closed).
• 1 fault output through a dry contact NO/NC (normally open / normally closed).
• 2 auxiliary outputs 30V/DC supervised and protected by a fuse to feed external (magnetic fire doors, sounders, etc).
• Available testing mode to facilitate the quick and easy verification of the sensors and call points.
• It allows to configure the open line, alarm detector and alarm call point threshold, to adjust to the operation with other detectors.
• It allows to configure the last detection zone as a supervision input of a external protection fire system with a fault indication.
• Metallic chest with frontal bolted door, 4 predrilled of 28 mm and one rectangular else of 140 x 20 mm for electric wiring and space for 2 batteries of 7Ah.
• RS485 MODBUS protocol on-demand.
• Possibility of software ON-LINE on PC using MODBUS functionality.
• CONTACTID on-demand.
• Certified according to EN 54-2 & EN 54-4 standards and CE mark.
Еще в силе акционная скидка 15% от стандартной цены на все варианты панели CLVR:
CLVR 4 (4 зоны) - 245,11 EUR (с НДС)
CLVR 8 (8 зон) - 264,50 EUR (с НДС)
CLVR 12 (12 зон) - 282,50 EUR (с НДС)
Features
• Control panels up to 12 zones for conventional detectors and call points use.
• 2 supervised sounder outputs, delayed from 0 to 10 minutes, and protected by a fuse.
• 1 alarm output through a dry contact NO/NC (normally open / normally closed).
• 1 fault output through a dry contact NO/NC (normally open / normally closed).
• 2 auxiliary outputs 30V/DC supervised and protected by a fuse to feed external (magnetic fire doors, sounders, etc).
• Available testing mode to facilitate the quick and easy verification of the sensors and call points.
• It allows to configure the open line, alarm detector and alarm call point threshold, to adjust to the operation with other detectors.
• It allows to configure the last detection zone as a supervision input of a external protection fire system with a fault indication.
• Metallic chest with frontal bolted door, 4 predrilled of 28 mm and one rectangular else of 140 x 20 mm for electric wiring and space for 2 batteries of 7Ah.
• RS485 MODBUS protocol on-demand.
• Possibility of software ON-LINE on PC using MODBUS functionality.
• CONTACTID on-demand.
• Certified according to EN 54-2 & EN 54-4 standards and CE mark.
Предложить свою цену
Все поля должны быть заполнены
Предложение отослано!
Заказ звонка
Все поля должны быть заполнены
Предложение отослано!